Dear Ray and All,
I've full control on this system, thus can you please suggest what changes
should I make to be able to use both Amber versions without conflict as and
when required.
Thanks for the suggestions.
On Fri, Dec 18, 2020 at 10:07 PM Ray Luo <rluo.uci.edu> wrote:
> Vaibhav,
>
> Nobody here can help you regarding this. You need your system
> administrator to look at your UNIX/LINUX environment to figure out
> what's going on.
>
> All the best,
> Ray
> --
> Ray Luo, Ph.D.
> Professor of Structural Biology/Biochemistry/Biophysics,
> Chemical and Materials Physics, Chemical and Biomolecular Engineering,
> Biomedical Engineering, and Materials Science and Engineering
> Department of Molecular Biology and Biochemistry
> University of California, Irvine, CA 92697-3900
>
> On Fri, Dec 18, 2020 at 1:34 AM Vaibhav Dixit <vaibhavadixit.gmail.com>
> wrote:
> >
> > Dear All,
> > I haven't been able to figure out a way around this conflict due to both
> > amber18 and amber20 simultaneously being installed on the workstation.
> > Thus hoping if someone on the list can please help/suggest me what
> options
> > to try next for the same.
> > Looking forward to getting valuable suggestions.
> > Thank you and best regards.
> >
> >
> > On Wed, Dec 16, 2020 at 7:43 AM Vaibhav Dixit <vaibhavadixit.gmail.com>
> > wrote:
> >
> > > Dear All,
> > > As suggested I added the "source /home/exx/Downloads/amber20/amber.sh"
> > > into my .bashrc file then sourced it.
> > > But I'm still getting error messages that amber18 is in the path. I'm
> > > curious to understand why this error didn't show up while testing the
> > > parallel version but appears while trying to use MMPBSA.py.MPI command.
> > > Can you please suggest me what is the best method to have two different
> > > versions of amber of a workstation and call a specific one when
> required?
> > > Thank you in advance and best regards.
> > >
> > > P.S. My .bashrc didn't even mention amber18 at any time, thus not sure
> > > how it was set up by the Exxact team who configured/installed amber18
> on
> > > this GPU system.
> > >
> > > (base) [exx.c107739 mmpbsa-6701-tyr]$ source
> > > /home/exx/Downloads/amber20/amber.sh
> > > (base) [exx.c107739 mmpbsa-6701-tyr]$ echo $AMBERHOME
> > > /home/exx/Downloads/amber20
> > > (base) [exx.c107739 mmpbsa-6701-tyr]$ vim /home/exx/.bashrc
> > > (base) [exx.c107739 mmpbsa-6701-tyr]$ source /home/exx/.bashrc
> > > (base) [exx.c107739 mmpbsa-6701-tyr]$ echo $AMBERHOME
> > > /home/exx/Downloads/amber20
> > > (base) [exx.c107739 mmpbsa-6701-tyr]$ mpirun -np 12 MMPBSA.py.MPI -O
> -i
> > > mmpbsa-decomp.in -o mmpbs-rouf-6701-tyr-pb.dat -do
> > > decomp-rouf-6701-tyr-pb.dat -sp ../rouf-6701-tyr-solv.prmtop -cp
> > > ../rouf-6701-tyr -lp ../tyr-dry.prmtop -y ../
> rouf-6701-tyr-solv-prod300.nc
> > > -rp ../rouf-6701-nolig-dry.prmtop
> > > Traceback (most recent call last):
> > > Traceback (most recent call last):
> > > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > > from MMPBSA_mods import main
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > > line 34, in <module>
> > > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > > from MMPBSA_mods import main
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > > line 34, in <module>
> > > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout, GBout,
> > > PBout,
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py
> > > ", line 586
> > > print('Not all frames minimized within tolerance', file=sys.stderr)
> > > Traceback (most
> recent
> > > call last):
> > > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > > ^
> > > SyntaxError: invalid syntax
> > > from MMPBSA_mods import main
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > > line 34, in <module>
> > > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> > > GBout, PBout,
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > > line 586
> > > print('Not all frames minimized within tolerance', file=sys.stderr)
> > > ^
> > > SyntaxError: invalid syntax
> > > Traceback (most recent call last):
> > > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > > Traceback (most recent call last):
> > > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > > from MMPBSA_mods import main
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > > line 34, in <module>
> > > from MMPBSA_mods import main
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > > line 34, in <module>
> > > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout, GBout,
> > > PBout,
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py
> > > ", line 586
> > > print('Not all frames minimized within tolerance', file=sys.stderr)
> > > from MMPBSA_mods.amber_outputs import (QHout,
> > > NMODEout, QMMMout, GBout, PBout,
> > > Traceback (most recent call last):
> > > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > > line 586
> > > print('Not all frames minimized within tolerance', file=sys.stderr)
> > > from MMPBSA_mods import
> main
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > > line 34, in <module>
> > > ^
> > > SyntaxError: invalid syntax
> > > from MMPBSA_mods.amber_outputs import (QHout,
> > > NMODEout, QMMMout, GBout, PBout,
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > > line 586 ^
> > > SyntaxError
> > > print('Not all frames minimized within tolerance', file=sys.stderr)
> > > : invalid syntax
> > > ^
> > > SyntaxError: invalid syntax
> > > Traceback (most recent call last):
> > > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout, GBout,
> > > PBout,
> > > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > > line from MMPBSA_mods import main
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > > line 34, in <module>
> > > 586
> > > print('Not all frames minimized within tolerance', file=sys.stderr)
> > > Traceback (most recent call last):
> > > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > > from
> MMPBSA_mods
> > > import main
> > > ^
> > > SyntaxError: File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > > line 34, in <module>
> > > invalid syntax
> > > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> > > GBout, PBout,
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > > line 586
> > > print('Not all frames minimized within tolerance', file=sys.stderr)
> > > ^
> > > SyntaxError: invalid syntax
> > > Traceback (most recent call last):
> > > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > > from MMPBSA_mods import main
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > > line 34, in <module>
> > > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout, GBout,
> > > PBout,
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > > line 586
> > > print('Not all frames minimized within tolerance', file=sys.stderr)
> > > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> > > GBout, PBout,
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > > line 586
> > > print('Not all frames minimized within tolerance', file=sys.stderr)
> > > ^
> > > SyntaxError: invalid syntax
> > > Traceback (most recent call last):
> > > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > > from MMPBSA_mods import main
> > > Traceback (most recent call last):
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > > line 34, in <module>
> > > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> > > GBout, PBout,
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > > line 586
> > > print('Not all frames minimized within tolerance', file=sys.stderr)
> > > Traceback (most recent call last):
> > > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > > from MMPBSA_mods import main
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > > line 34, in <module>
> > > ^
> > > SyntaxError: invalid syntax from
> > > MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout, GBout,
> PBout,
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > > line
> > > ^
> > > SyntaxError: invalid syntax
> > > 586
> > > print('Not all frames minimized within tolerance', file=sys.stderr)
> > > ^
> > > SyntaxError: invalid syntax
> > > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > > from MMPBSA_mods import main
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > > line 34, in <module>
> > > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> > > GBout, PBout,
> > > File
> > >
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > > line 586
> > > print('Not all frames minimized within tolerance', file=sys.stderr)
> > > ^
> > > SyntaxError: invalid syntax
> > > (base) [exx.c107739 mmpbsa-6701-tyr]$
> > >
> > > On Tue, Dec 15, 2020 at 11:54 PM Ray Luo <rluo.uci.edu> wrote:
> > >
> > >> Yes, you do need to change .bashrc. Looks like amber18 is ahead of
> > >> amber20 in your path.
> > >>
> > >> All the best,
> > >> Ray
> > >> --
> > >> Ray Luo, Ph.D.
> > >> Professor of Structural Biology/Biochemistry/Biophysics,
> > >> Chemical and Materials Physics, Chemical and Biomolecular Engineering,
> > >> Biomedical Engineering, and Materials Science and Engineering
> > >> Department of Molecular Biology and Biochemistry
> > >> University of California, Irvine, CA 92697-3900
> > >>
> > >> On Tue, Dec 15, 2020 at 9:26 AM Vaibhav Dixit <
> vaibhavadixit.gmail.com>
> > >> wrote:
> > >> >
> > >> > Dear All,
> > >> > I'm trying to run MMPBSA.py.MPI using recently installed Amber20 for
> > >> which
> > >> > I sourced the amber.sh file from amber20 directory.
> > >> > But I'm getting the following error which doesn't appear with the
> serial
> > >> > version.
> > >> > Do I need to change the .bashrc for this to work?
> > >> > thanks in advance for your suggestions.
> > >> > best regards
> > >> >
> > >> > (base) [exx.c107739 mmpbsa-6701-tyr]$ echo $AMBERHOME
> > >> > /home/exx/Downloads/amber20
> > >> > (base) [exx.c107739 mmpbsa-6701-tyr]$ mpirun -np 12 MMPBSA.py.MPI
> -O -i
> > >> > mmpbsa-decomp.in -o mmpbs-rouf-6701-tyr-pb.dat -do
> > >> > decomp-rouf-6701-tyr-pb.dat -sp ../rouf-6701-tyr-solv.prmtop -cp
> > >> > ../rouf-6701-tyr-dry.prmtop -lp ../tyr-dry.prmtop -y ../
> > >> > rouf-6701-tyr-solv-prod300.nc -rp ../rouf-6701-nolig-dry.prmtop
> > >> > Traceback (most recent call last):
> > >> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > >> > from MMPBSA_mods import main
> > >> > Traceback (most recent call last):
> > >> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > >> > line 34, in <module>
> > >> > from MMPBSA_mods import main
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > >> > line 34, in <module>
> > >> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> > >> GBout,
> > >> > PBout,
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > >> > line 586
> > >> > print('Not all frames minimized within tolerance',
> file=sys.stderr)
> > >> > ^
> > >> > SyntaxError: invalid syntax
> > >> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> > >> GBout,
> > >> > PBout,
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > >> > line 586
> > >> > print('Not all frames minimized within tolerance',
> file=sys.stderr)
> > >> > ^
> > >> > SyntaxError: invalid syntax
> > >> > Traceback (most recent call last):
> > >> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > >> > from MMPBSA_mods import main
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > >> > line 34, in <module>
> > >> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> > >> GBout,
> > >> > PBout,
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > >> > line 586
> > >> > print('Not all frames minimized within tolerance',
> file=sys.stderr)
> > >> > ^
> > >> > SyntaxError: invalid syntax
> > >> > Traceback (most recent call last):
> > >> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > >> > from MMPBSA_mods import main
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > >> > line 34, in <module>
> > >> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> > >> GBout,
> > >> > PBout,
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > >> > line 586
> > >> > print('Not all frames minimized within tolerance',
> file=sys.stderr)
> > >> > ^
> > >> > SyntaxError: invalid syntax
> > >> > Traceback (most recent call last):
> > >> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > >> > from MMPBSA_mods import main
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > >> > line 34, in <module>
> > >> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> > >> GBout,
> > >> > PBout,
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > >> > line 586
> > >> > print('Not all frames minimized within tolerance',
> file=sys.stderr)
> > >> > ^
> > >> > SyntaxError: invalid syntax
> > >> > Traceback (most recent call last):
> > >> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > >> > from MMPBSA_mods import main
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > >> > line 34, in <module>
> > >> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> > >> GBout,
> > >> > PBout,
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > >> > line 586
> > >> > print('Not all frames minimized within tolerance',
> file=sys.stderr)
> > >> > ^
> > >> > SyntaxError: invalid syntax
> > >> > Traceback (most recent call last):
> > >> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > >> > from MMPBSA_mods import main
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > >> > line 34, in <module>
> > >> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> > >> GBout,
> > >> > PBout,
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > >> > line 586
> > >> > print('Not all frames minimized within tolerance',
> file=sys.stderr)
> > >> > ^
> > >> > SyntaxError: invalid syntax
> > >> > Traceback (most recent call last):
> > >> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > >> > from MMPBSA_mods import main
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > >> > line 34, in <module>
> > >> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> > >> GBout,
> > >> > PBout,
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > >> > line 586
> > >> > print('Not all frames minimized within tolerance',
> file=sys.stderr)
> > >> > ^
> > >> > SyntaxError: invalid syntax
> > >> > Traceback (most recent call last):
> > >> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > >> > from MMPBSA_mods import main
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > >> > line 34, in <module>
> > >> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> > >> GBout,
> > >> > PBout,
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > >> > line 586
> > >> > print('Not all frames minimized within tolerance',
> file=sys.stderr)
> > >> > ^
> > >> > SyntaxError: invalid syntax
> > >> > Traceback (most recent call last):
> > >> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > >> > from MMPBSA_mods import main
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > >> > line 34, in <module>
> > >> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> > >> GBout,
> > >> > PBout,
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > >> > line 586
> > >> > print('Not all frames minimized within tolerance',
> file=sys.stderr)
> > >> > ^
> > >> > SyntaxError: invalid syntax
> > >> > Traceback (most recent call last):
> > >> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > >> > from MMPBSA_mods import main
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > >> > line 34, in <module>
> > >> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> > >> GBout,
> > >> > PBout,
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > >> > line 586
> > >> > print('Not all frames minimized within tolerance',
> file=sys.stderr)
> > >> > ^
> > >> > SyntaxError: invalid syntax
> > >> > Traceback (most recent call last):
> > >> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> > >> > from MMPBSA_mods import main
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> > >> > line 34, in <module>
> > >> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> > >> GBout,
> > >> > PBout,
> > >> > File
> > >> >
> > >>
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> > >> > line 586
> > >> > print('Not all frames minimized within tolerance',
> file=sys.stderr)
> > >> > ^
> > >> > SyntaxError: invalid syntax
> > >> > (base) [exx.c107739 mmpbsa-6701-tyr]$
> > >> >
> > >> > --
> > >> >
> > >> > Regards,
> > >> >
> > >> > Dr. Vaibhav A. Dixit,
> > >> >
> > >> > Visiting Scientist at the Manchester Institute of Biotechnology
> (MIB),
> > >> The
> > >> > University of Manchester, 131 Princess Street, Manchester M1 7DN,
> UK.
> > >> > AND
> > >> > Assistant Professor,
> > >> > Department of Pharmacy,
> > >> > ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
> > >> > Birla Institute of Technology and Sciences Pilani (BITS-Pilani),
> > >> > VidyaVihar Campus, street number 41, Pilani, Rajasthan 333031.
> > >> > India.
> > >> > Phone No. +91 1596 255652, Mob. No. +91-7709129400,
> > >> > Email: vaibhav.dixit.pilani.bits-pilani.ac.in,
> vaibhavadixit.gmail.com
> > >> > http://www.bits-pilani.ac.in/pilani/vaibhavdixit/profile
> > >> > https://www.linkedin.com/in/vaibhav-dixit-b1a07a39/
> > >> >
> > >> > ORCID ID: https://orcid.org/0000-0003-4015-2941
> > >> >
> > >> >
> http://scholar.google.co.in/citations?user=X876BKcAAAAJ&hl=en&oi=sra
> > >> >
> > >> > P Please consider the environment before printing this e-mail
> > >> > _______________________________________________
> > >> > AMBER mailing list
> > >> > AMBER.ambermd.org
> > >> > http://lists.ambermd.org/mailman/listinfo/amber
> > >>
> > >> _______________________________________________
> > >> AMBER mailing list
> > >> AMBER.ambermd.org
> > >> http://lists.ambermd.org/mailman/listinfo/amber
> > >>
> > >
> > >
> > > --
> > >
> > > Regards,
> > >
> > > Dr. Vaibhav A. Dixit,
> > >
> > > Visiting Scientist at the Manchester Institute of Biotechnology (MIB),
> The
> > > University of Manchester, 131 Princess Street, Manchester M1 7DN, UK.
> > > AND
> > > Assistant Professor,
> > > Department of Pharmacy,
> > > ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
> > > Birla Institute of Technology and Sciences Pilani (BITS-Pilani),
> > > VidyaVihar Campus, street number 41, Pilani, Rajasthan 333031.
> > > India.
> > > Phone No. +91 1596 255652, Mob. No. +91-7709129400,
> > > Email: vaibhav.dixit.pilani.bits-pilani.ac.in, vaibhavadixit.gmail.com
> > > http://www.bits-pilani.ac.in/pilani/vaibhavdixit/profile
> > > https://www.linkedin.com/in/vaibhav-dixit-b1a07a39/
> > >
> > > ORCID ID: https://orcid.org/0000-0003-4015-2941
> > >
> > > http://scholar.google.co.in/citations?user=X876BKcAAAAJ&hl=en&oi=sra
> > >
> > > P Please consider the environment before printing this e-mail
> > >
> > >
> >
> > --
> >
> > Regards,
> >
> > Dr. Vaibhav A. Dixit,
> >
> > Visiting Scientist at the Manchester Institute of Biotechnology (MIB),
> The
> > University of Manchester, 131 Princess Street, Manchester M1 7DN, UK.
> > AND
> > Assistant Professor,
> > Department of Pharmacy,
> > ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
> > Birla Institute of Technology and Sciences Pilani (BITS-Pilani),
> > VidyaVihar Campus, street number 41, Pilani, Rajasthan 333031.
> > India.
> > Phone No. +91 1596 255652, Mob. No. +91-7709129400,
> > Email: vaibhav.dixit.pilani.bits-pilani.ac.in, vaibhavadixit.gmail.com
> > http://www.bits-pilani.ac.in/pilani/vaibhavdixit/profile
> > https://www.linkedin.com/in/vaibhav-dixit-b1a07a39/
> >
> > ORCID ID: https://orcid.org/0000-0003-4015-2941
> >
> > http://scholar.google.co.in/citations?user=X876BKcAAAAJ&hl=en&oi=sra
> >
> > P Please consider the environment before printing this e-mail
> > _______________________________________________
> > AMBER mailing list
> > AMBER.ambermd.org
> > http://lists.ambermd.org/mailman/listinfo/amber
>
> _______________________________________________
> AMBER mailing list
> AMBER.ambermd.org
> http://lists.ambermd.org/mailman/listinfo/amber
>
--
Regards,
Dr. Vaibhav A. Dixit,
Visiting Scientist at the Manchester Institute of Biotechnology (MIB), The
University of Manchester, 131 Princess Street, Manchester M1 7DN, UK.
AND
Assistant Professor,
Department of Pharmacy,
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
Birla Institute of Technology and Sciences Pilani (BITS-Pilani),
VidyaVihar Campus, street number 41, Pilani, Rajasthan 333031.
India.
Phone No. +91 1596 255652, Mob. No. +91-7709129400,
Email: vaibhav.dixit.pilani.bits-pilani.ac.in, vaibhavadixit.gmail.com
http://www.bits-pilani.ac.in/pilani/vaibhavdixit/profile
https://www.linkedin.com/in/vaibhav-dixit-b1a07a39/
ORCID ID: https://orcid.org/0000-0003-4015-2941
http://scholar.google.co.in/citations?user=X876BKcAAAAJ&hl=en&oi=sra
P Please consider the environment before printing this e-mail
_______________________________________________
AMBER mailing list
AMBER.ambermd.org
http://lists.ambermd.org/mailman/listinfo/amber
Received on Fri Dec 18 2020 - 09:00:03 PST
