Dear All,
I haven't been able to figure out a way around this conflict due to both
amber18 and amber20 simultaneously being installed on the workstation.
Thus hoping if someone on the list can please help/suggest me what options
to try next for the same.
Looking forward to getting valuable suggestions.
Thank you and best regards.
On Wed, Dec 16, 2020 at 7:43 AM Vaibhav Dixit <vaibhavadixit.gmail.com>
wrote:
> Dear All,
> As suggested I added the "source /home/exx/Downloads/amber20/amber.sh"
> into my .bashrc file then sourced it.
> But I'm still getting error messages that amber18 is in the path. I'm
> curious to understand why this error didn't show up while testing the
> parallel version but appears while trying to use MMPBSA.py.MPI command.
> Can you please suggest me what is the best method to have two different
> versions of amber of a workstation and call a specific one when required?
> Thank you in advance and best regards.
>
> P.S. My .bashrc didn't even mention amber18 at any time, thus not sure
> how it was set up by the Exxact team who configured/installed amber18 on
> this GPU system.
>
> (base) [exx.c107739 mmpbsa-6701-tyr]$ source
> /home/exx/Downloads/amber20/amber.sh
> (base) [exx.c107739 mmpbsa-6701-tyr]$ echo $AMBERHOME
> /home/exx/Downloads/amber20
> (base) [exx.c107739 mmpbsa-6701-tyr]$ vim /home/exx/.bashrc
> (base) [exx.c107739 mmpbsa-6701-tyr]$ source /home/exx/.bashrc
> (base) [exx.c107739 mmpbsa-6701-tyr]$ echo $AMBERHOME
> /home/exx/Downloads/amber20
> (base) [exx.c107739 mmpbsa-6701-tyr]$ mpirun -np 12 MMPBSA.py.MPI -O -i
> mmpbsa-decomp.in -o mmpbs-rouf-6701-tyr-pb.dat -do
> decomp-rouf-6701-tyr-pb.dat -sp ../rouf-6701-tyr-solv.prmtop -cp
> ../rouf-6701-tyr -lp ../tyr-dry.prmtop -y ../rouf-6701-tyr-solv-prod300.nc
> -rp ../rouf-6701-nolig-dry.prmtop
> Traceback (most recent call last):
> Traceback (most recent call last):
> File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> from MMPBSA_mods import main
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> line 34, in <module>
> File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> from MMPBSA_mods import main
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> line 34, in <module>
> from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout, GBout,
> PBout,
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py
> ", line 586
> print('Not all frames minimized within tolerance', file=sys.stderr)
> Traceback (most recent
> call last):
> File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> ^
> SyntaxError: invalid syntax
> from MMPBSA_mods import main
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> line 34, in <module>
> from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> GBout, PBout,
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> line 586
> print('Not all frames minimized within tolerance', file=sys.stderr)
> ^
> SyntaxError: invalid syntax
> Traceback (most recent call last):
> File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> Traceback (most recent call last):
> File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> from MMPBSA_mods import main
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> line 34, in <module>
> from MMPBSA_mods import main
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> line 34, in <module>
> from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout, GBout,
> PBout,
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py
> ", line 586
> print('Not all frames minimized within tolerance', file=sys.stderr)
> from MMPBSA_mods.amber_outputs import (QHout,
> NMODEout, QMMMout, GBout, PBout,
> Traceback (most recent call last):
> File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> line 586
> print('Not all frames minimized within tolerance', file=sys.stderr)
> from MMPBSA_mods import main
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> line 34, in <module>
> ^
> SyntaxError: invalid syntax
> from MMPBSA_mods.amber_outputs import (QHout,
> NMODEout, QMMMout, GBout, PBout,
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> line 586 ^
> SyntaxError
> print('Not all frames minimized within tolerance', file=sys.stderr)
> : invalid syntax
> ^
> SyntaxError: invalid syntax
> Traceback (most recent call last):
> from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout, GBout,
> PBout,
> File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> line from MMPBSA_mods import main
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> line 34, in <module>
> 586
> print('Not all frames minimized within tolerance', file=sys.stderr)
> Traceback (most recent call last):
> File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> from MMPBSA_mods
> import main
> ^
> SyntaxError: File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> line 34, in <module>
> invalid syntax
> from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> GBout, PBout,
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> line 586
> print('Not all frames minimized within tolerance', file=sys.stderr)
> ^
> SyntaxError: invalid syntax
> Traceback (most recent call last):
> File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> from MMPBSA_mods import main
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> line 34, in <module>
> from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout, GBout,
> PBout,
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> line 586
> print('Not all frames minimized within tolerance', file=sys.stderr)
> from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> GBout, PBout,
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> line 586
> print('Not all frames minimized within tolerance', file=sys.stderr)
> ^
> SyntaxError: invalid syntax
> Traceback (most recent call last):
> File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> from MMPBSA_mods import main
> Traceback (most recent call last):
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> line 34, in <module>
> from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> GBout, PBout,
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> line 586
> print('Not all frames minimized within tolerance', file=sys.stderr)
> Traceback (most recent call last):
> File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> from MMPBSA_mods import main
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> line 34, in <module>
> ^
> SyntaxError: invalid syntax from
> MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout, GBout, PBout,
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> line
> ^
> SyntaxError: invalid syntax
> 586
> print('Not all frames minimized within tolerance', file=sys.stderr)
> ^
> SyntaxError: invalid syntax
> File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
> from MMPBSA_mods import main
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
> line 34, in <module>
> from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
> GBout, PBout,
> File
> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
> line 586
> print('Not all frames minimized within tolerance', file=sys.stderr)
> ^
> SyntaxError: invalid syntax
> (base) [exx.c107739 mmpbsa-6701-tyr]$
>
> On Tue, Dec 15, 2020 at 11:54 PM Ray Luo <rluo.uci.edu> wrote:
>
>> Yes, you do need to change .bashrc. Looks like amber18 is ahead of
>> amber20 in your path.
>>
>> All the best,
>> Ray
>> --
>> Ray Luo, Ph.D.
>> Professor of Structural Biology/Biochemistry/Biophysics,
>> Chemical and Materials Physics, Chemical and Biomolecular Engineering,
>> Biomedical Engineering, and Materials Science and Engineering
>> Department of Molecular Biology and Biochemistry
>> University of California, Irvine, CA 92697-3900
>>
>> On Tue, Dec 15, 2020 at 9:26 AM Vaibhav Dixit <vaibhavadixit.gmail.com>
>> wrote:
>> >
>> > Dear All,
>> > I'm trying to run MMPBSA.py.MPI using recently installed Amber20 for
>> which
>> > I sourced the amber.sh file from amber20 directory.
>> > But I'm getting the following error which doesn't appear with the serial
>> > version.
>> > Do I need to change the .bashrc for this to work?
>> > thanks in advance for your suggestions.
>> > best regards
>> >
>> > (base) [exx.c107739 mmpbsa-6701-tyr]$ echo $AMBERHOME
>> > /home/exx/Downloads/amber20
>> > (base) [exx.c107739 mmpbsa-6701-tyr]$ mpirun -np 12 MMPBSA.py.MPI -O -i
>> > mmpbsa-decomp.in -o mmpbs-rouf-6701-tyr-pb.dat -do
>> > decomp-rouf-6701-tyr-pb.dat -sp ../rouf-6701-tyr-solv.prmtop -cp
>> > ../rouf-6701-tyr-dry.prmtop -lp ../tyr-dry.prmtop -y ../
>> > rouf-6701-tyr-solv-prod300.nc -rp ../rouf-6701-nolig-dry.prmtop
>> > Traceback (most recent call last):
>> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
>> > from MMPBSA_mods import main
>> > Traceback (most recent call last):
>> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
>> > line 34, in <module>
>> > from MMPBSA_mods import main
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
>> > line 34, in <module>
>> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
>> GBout,
>> > PBout,
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
>> > line 586
>> > print('Not all frames minimized within tolerance', file=sys.stderr)
>> > ^
>> > SyntaxError: invalid syntax
>> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
>> GBout,
>> > PBout,
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
>> > line 586
>> > print('Not all frames minimized within tolerance', file=sys.stderr)
>> > ^
>> > SyntaxError: invalid syntax
>> > Traceback (most recent call last):
>> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
>> > from MMPBSA_mods import main
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
>> > line 34, in <module>
>> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
>> GBout,
>> > PBout,
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
>> > line 586
>> > print('Not all frames minimized within tolerance', file=sys.stderr)
>> > ^
>> > SyntaxError: invalid syntax
>> > Traceback (most recent call last):
>> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
>> > from MMPBSA_mods import main
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
>> > line 34, in <module>
>> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
>> GBout,
>> > PBout,
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
>> > line 586
>> > print('Not all frames minimized within tolerance', file=sys.stderr)
>> > ^
>> > SyntaxError: invalid syntax
>> > Traceback (most recent call last):
>> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
>> > from MMPBSA_mods import main
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
>> > line 34, in <module>
>> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
>> GBout,
>> > PBout,
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
>> > line 586
>> > print('Not all frames minimized within tolerance', file=sys.stderr)
>> > ^
>> > SyntaxError: invalid syntax
>> > Traceback (most recent call last):
>> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
>> > from MMPBSA_mods import main
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
>> > line 34, in <module>
>> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
>> GBout,
>> > PBout,
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
>> > line 586
>> > print('Not all frames minimized within tolerance', file=sys.stderr)
>> > ^
>> > SyntaxError: invalid syntax
>> > Traceback (most recent call last):
>> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
>> > from MMPBSA_mods import main
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
>> > line 34, in <module>
>> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
>> GBout,
>> > PBout,
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
>> > line 586
>> > print('Not all frames minimized within tolerance', file=sys.stderr)
>> > ^
>> > SyntaxError: invalid syntax
>> > Traceback (most recent call last):
>> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
>> > from MMPBSA_mods import main
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
>> > line 34, in <module>
>> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
>> GBout,
>> > PBout,
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
>> > line 586
>> > print('Not all frames minimized within tolerance', file=sys.stderr)
>> > ^
>> > SyntaxError: invalid syntax
>> > Traceback (most recent call last):
>> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
>> > from MMPBSA_mods import main
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
>> > line 34, in <module>
>> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
>> GBout,
>> > PBout,
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
>> > line 586
>> > print('Not all frames minimized within tolerance', file=sys.stderr)
>> > ^
>> > SyntaxError: invalid syntax
>> > Traceback (most recent call last):
>> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
>> > from MMPBSA_mods import main
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
>> > line 34, in <module>
>> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
>> GBout,
>> > PBout,
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
>> > line 586
>> > print('Not all frames minimized within tolerance', file=sys.stderr)
>> > ^
>> > SyntaxError: invalid syntax
>> > Traceback (most recent call last):
>> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
>> > from MMPBSA_mods import main
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
>> > line 34, in <module>
>> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
>> GBout,
>> > PBout,
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
>> > line 586
>> > print('Not all frames minimized within tolerance', file=sys.stderr)
>> > ^
>> > SyntaxError: invalid syntax
>> > Traceback (most recent call last):
>> > File "/usr/local/amber18/bin/MMPBSA.py.MPI", line 41, in <module>
>> > from MMPBSA_mods import main
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/main.py",
>> > line 34, in <module>
>> > from MMPBSA_mods.amber_outputs import (QHout, NMODEout, QMMMout,
>> GBout,
>> > PBout,
>> > File
>> >
>> "/home/exx/Downloads/amber20/lib/python3.8/site-packages/MMPBSA_mods/amber_outputs.py",
>> > line 586
>> > print('Not all frames minimized within tolerance', file=sys.stderr)
>> > ^
>> > SyntaxError: invalid syntax
>> > (base) [exx.c107739 mmpbsa-6701-tyr]$
>> >
>> > --
>> >
>> > Regards,
>> >
>> > Dr. Vaibhav A. Dixit,
>> >
>> > Visiting Scientist at the Manchester Institute of Biotechnology (MIB),
>> The
>> > University of Manchester, 131 Princess Street, Manchester M1 7DN, UK.
>> > AND
>> > Assistant Professor,
>> > Department of Pharmacy,
>> > ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
>> > Birla Institute of Technology and Sciences Pilani (BITS-Pilani),
>> > VidyaVihar Campus, street number 41, Pilani, Rajasthan 333031.
>> > India.
>> > Phone No. +91 1596 255652, Mob. No. +91-7709129400,
>> > Email: vaibhav.dixit.pilani.bits-pilani.ac.in, vaibhavadixit.gmail.com
>> > http://www.bits-pilani.ac.in/pilani/vaibhavdixit/profile
>> > https://www.linkedin.com/in/vaibhav-dixit-b1a07a39/
>> >
>> > ORCID ID: https://orcid.org/0000-0003-4015-2941
>> >
>> > http://scholar.google.co.in/citations?user=X876BKcAAAAJ&hl=en&oi=sra
>> >
>> > P Please consider the environment before printing this e-mail
>> > _______________________________________________
>> > AMBER mailing list
>> > AMBER.ambermd.org
>> > http://lists.ambermd.org/mailman/listinfo/amber
>>
>> _______________________________________________
>> AMBER mailing list
>> AMBER.ambermd.org
>> http://lists.ambermd.org/mailman/listinfo/amber
>>
>
>
> --
>
> Regards,
>
> Dr. Vaibhav A. Dixit,
>
> Visiting Scientist at the Manchester Institute of Biotechnology (MIB), The
> University of Manchester, 131 Princess Street, Manchester M1 7DN, UK.
> AND
> Assistant Professor,
> Department of Pharmacy,
> ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
> Birla Institute of Technology and Sciences Pilani (BITS-Pilani),
> VidyaVihar Campus, street number 41, Pilani, Rajasthan 333031.
> India.
> Phone No. +91 1596 255652, Mob. No. +91-7709129400,
> Email: vaibhav.dixit.pilani.bits-pilani.ac.in, vaibhavadixit.gmail.com
> http://www.bits-pilani.ac.in/pilani/vaibhavdixit/profile
> https://www.linkedin.com/in/vaibhav-dixit-b1a07a39/
>
> ORCID ID: https://orcid.org/0000-0003-4015-2941
>
> http://scholar.google.co.in/citations?user=X876BKcAAAAJ&hl=en&oi=sra
>
> P Please consider the environment before printing this e-mail
>
>
--
Regards,
Dr. Vaibhav A. Dixit,
Visiting Scientist at the Manchester Institute of Biotechnology (MIB), The
University of Manchester, 131 Princess Street, Manchester M1 7DN, UK.
AND
Assistant Professor,
Department of Pharmacy,
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
Birla Institute of Technology and Sciences Pilani (BITS-Pilani),
VidyaVihar Campus, street number 41, Pilani, Rajasthan 333031.
India.
Phone No. +91 1596 255652, Mob. No. +91-7709129400,
Email: vaibhav.dixit.pilani.bits-pilani.ac.in, vaibhavadixit.gmail.com
http://www.bits-pilani.ac.in/pilani/vaibhavdixit/profile
https://www.linkedin.com/in/vaibhav-dixit-b1a07a39/
ORCID ID: https://orcid.org/0000-0003-4015-2941
http://scholar.google.co.in/citations?user=X876BKcAAAAJ&hl=en&oi=sra
P Please consider the environment before printing this e-mail
_______________________________________________
AMBER mailing list
AMBER.ambermd.org
http://lists.ambermd.org/mailman/listinfo/amber
Received on Fri Dec 18 2020 - 02:00:03 PST
