[AMBER] re

From: <sunyeping.aliyun.com>
Date: Wed, 03 Jul 2013 09:26:14 +0800

Dear professor Francois,
 
There seems to be some problems with my R.E.D. server account and password and I cannot access the download page for these results.  When I use the following account and password to enter download page
 

sunyeping.aliyun.com
6d781e3d84
 
I get the error message "You do not have the rights to display the web page you just tried to reach.Consequently, you were redirected to this error page...If you try to access to your private account to download your data, provide again your login and password."
 
Counld you check it?
 
Regards,
 
Yeping Sun
 

------------------------------------------------------------------发件人:FyD<fyd@q4md-forcefieldtools.org>发送日期:2013年7月2日 23:00收件人:AMBER Mailing List<amber@ambermd.org>;主 题:Re: [AMBER] FATAL: Atom XXX does not have a typeYeping Sun,I checked P5493. I think you could use:http://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/molecule.jpgThe RESP inputs for the whole molecule:http://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Mol_m1/input1_m1http://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Mol_m1/input2_m1Charges are corrected for rounding off errors:http://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Mol_m1/Mol_m1-charge.logThe FF lib in the mol3 file format:http://q4md-forcefieldtools.org/Tutorial/leap-mol3.phphttp://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Mol_m1/Mol_m1-o1.mol2See the frcmod files:http://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Data-Default-Proj/frcmod.knownhttp://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Data-Default-Proj/frcmod.unknown-> 'CM-C -O2' is unknown; well, our algo. were not able to find acorrespondence; we will correct that; you could define that and add itquite easily...The corresponding leaprc file:http://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Data-Default-Proj/leaprc.ff13q4mdfftjust use 'm0'...The only differences in charge values between 'your' data and 'mine' should be related to molecular orientations; i.e. charge differences lower than .07 e.regards, Francois> I have used R.E.D. Server, and get the mol2 file. The job ID is > P5493. Please see the attachment. As you mentioned in the previous > mail that the mol2 file produced by R.E.D. Server doesn't has atom > type information, and you can help to produce a mol3 file which have > neccessary information needed by leap. Could you do these for me? > ------------------------------------------------------------------????FyD<fyd@q4md-forcefieldtools.org>?????2013?7?2? 21:00????AMBER Mailing List<amber@ambermd.org>;????Re: [AMBER] ???Re: FATAL: Atom XXX does not have a typeDear Yeping Sun,> It looks like you did not use Ante_R.E.D. 2.0; chemical equivalencing> is not correctly performed: The charges are all but correct when one> wishes to use them in MD simulation.> I would use R.E.D. Server; first Ante_R.E.D. 2.0 and then R.E.D. III.x> or R.E.D. IV.>> I let you know what we get with R.E.D. Python...See the R.E.D. Python job; your data at:http://q4mdfft:q4mdfft2013@cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/login:cluster -> q4mdfft:q4mdfft2013I did not know what you wanted; so I generated FF libs for (i) the whole molecule and (ii) a putative molecular fragment at the CH3CO-NHR position:See:http://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Project.configSee a .jpg image with atom > typin> g for the whole > molecule:http://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/molecule.jpg& its corresponding fragment:http://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/fragment.jpgSee the corresponding RESP inputs for the whole molecule:http://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Mol_m1/input1_m1http://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Mol_m1/input2_m1& its corresponding fragment:http://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Mol_m1/input1_m1.smhttp://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Mol_m1/input2_m1.smCharges are corrected for rounding off > errors:http://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Mol_m1/Mol_m1-charge.loghttp://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/> Mol_m1/Mol_m1-charge.sm.logThe FF libs in the mol3 file > format:http://q4md-forcefieldtools.org/Tutorial/leap-mol3.phphttp://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Mol_m1/Mol_m1-o1.mol2http://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Mol_m1/Mol_m1-o1-sm1.mol2the mol3 file format is interesting mainly for the fragment where the N2 atom is defined has a 'head'...please, have a look at the charge values (do not pay attention to the polarizability values); the values, which are equivalent are forced to be equivalent because the corresponding atoms are chemically equivalent (this is defined in the RESP inputs). this is important for MD simulations...See the frcmod > files:http://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Data-Default-Proj/frcmod.knownhttp://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Data-Default-Proj/frcmod> .correspondence-> > emptyhttp://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Data-Default-Proj/frcmod.unknown-> 'CM-C -O2' is unknown; well, our algo. were not able to find a correspondence; we will correct that; you could define that and add it quite easily...the corresponding leaprc file:http://cluster.q4md-forcefieldtools.org/~ucpublic1/ADF1ADF3-A-Yeping-Sun/Data-R.E.D.Server/Data-Default-Proj/leaprc.ff13q4mdfftData are kept 5 days on R.E.D. Server; see:http://q4md-forcefieldtools.org/REDS/faq.php#11I hope this helps.regards, Francois>> Thank you for your explanation. According to your instruction, I use>> antechamber -i G39_H.pdb -fi pdb -o G39_H.mol2 -fo mol2 -c bcc>> to produce the mol2 file, and then use>> parmchk -i G39_H.mol2 -f mol2 -o frcmod>> to produce the frcmod file. This time the G39_H.mole file seems to>> have atom types in it. Next I use>> tleap -s -f leap.in>> the leap.in file is:>> source leaprc.gaffsource > leaprc.ff10leaprc.f> f03.r1loadamberparams>> frcmodMOL = loadmol2 G39_H.mol2comp = > loadpdb>> 3cl0_H274Y_N1_H_SG_noh.pdbbond comp.92.SG > comp.417.SGbond>> comp.124.SG comp.129.SGbond comp.183.SG > comp.230.SGbond comp.232.SG>> comp.237.SGbond comp.91.SG > comp.417.SGbond comp.124.SG>> comp.129.SGbond comp.183.SG > comp.230.SGbond comp.232.SG>> comp.237.SGbond comp.278.SG > comp.291.SGbond comp.91.SG>> comp.417.SGbond comp.280.SG > comp.289.SGbond comp.318.SG>> comp.336.SGbond comp.421.SG > comp.447.SGsolvatebox comp TIP3PBOX>> 10.0addions comp Na+ 0saveoff > comp 3cl0.offsaveamberparm comp>> 3cl0.prmtop 3cl0.inpcrdquit>> But > I still get the error message (please see leap.log);>> Fatal: Atom > .R<G39 469>.A<C1 1> does not have a type>> >  ....................................................................................................>> FATAL:  Atom .R<G39 469>.A<N4 20> does not have a type.>>  >> I suspect that leap convert the original numbering of the ligand,>> G39, from 800 to 469, so I change the G39 numbering > from> 800 to 469>> in the pdb file (3cl0_H274Y_N1_H_SG_noh.pdb) and save > the new file>> as 3cl0_H274Y_N1_H_SG_noh.pdb, and change the G39 > numbering from 800>> to 469 in the mol2 file and save the new mol2 > file as>> G39_H_mod.mol2, and change the input names of the pdb and > mol2 files>> in leap.in accordingly and save the new file as > leap_mod.in.>> However, I get new error message  "Illegal CONECT > record in pdb>> file". Please see leap_mod.log)>> The files > including  3cl0_H274Y_N1_H_SG_noh.pdb,>> > 3cl0_H274Y_N1_H_SG_noh_mod.pdb, G39_H.pdb, G39_H.mol2, frcmod,>> > G39_H_mod.mol2, leap.in, leap_mod.in, leap.log, leap_mod.log are>> > included in the attachment.>> Could you help me with it? Thank > you!>>  >> Sincerely,>> Yeping Sun>> > ------------------------------------------------------------------????FyD<fyd@q4md-forcefieldtools.org>?????2013?6?28? 15:04????AMBER Mailing List<amber@ambermd.org>;????Re: [AMBER] FATAL: Atom XXX does not have a type Dear Yeping Sun,R.E.D. III.x or R.E.D. IV (Perl) > d> oes _not_ perform atom typing (R.E.D. Python does). You need to > define the atom types in the mol2 file...Let's take an example in > R.E.DD.B.http://q4md-forcefieldtools.org/REDDB/projects/W-1/The mol2 > file:http://q4md-forcefieldtools.org/REDDB/projects/W-1/tripos1.mol2@<TRIPOS>ATOM 1 C1 1.352237 -0.856933 0.225852 C 1 DMSO -0.2897 **** 2 H11 1.336243 -1.843530 -0.221408 H 1 DMSO 0.1284 **** 3 H12 1.276947 -0.923392 1.304085 H 1 DMSO 0.1284 **** 4 H13 2.275139 -0.356278 -0.035153 H 1 DMSO 0.1284 **** 5 S2 -0.000004 0.136959 -0.414455 S 1 DMSO 0.3177 **** 6 O3 -0.000040 1.405694 0.357557 O 1 DMSO -0.5085 **** 7 C4 -1.352189 -0.857006 0.225851 C 1 DMSO -0.2897 **** 8 H41 -2.275117 -0.356396 -0.035149 H 1 DMSO 0.1284 >> ****>> 9>> H42 -1.336143 -1.843599 -0.221415 H 1 DMSO 0.1284 **** 10 H43>> -1.276895 -0.923466 1.304085 H 1 DMSO 0.1284 **** ^^^^^ ** here as>> you can see the chemical elements have to be replaced by the atom>> types; i.e. in this case:@<TRIPOS>ATOM 1 C1 1.352237 > -0.8569> 33>> 0.225852 CT 1 DMSO -0.2897 **** 2 H11 1.336243 -1.843530 > -0.221408>> H1 1 DMSO 0.1284 **** 3 H12 1.276947 -0.923392 1.304085 > H1 1 DMSO>> 0.1284 **** 4 H13 2.275139 -0.356278 -0.035153 H1 1 DMSO > 0.1284 ****>> 5 S2 -0.000004 0.136959 -0.414455 S 1 DMSO 0.3177 **** > 6 O3>> -0.000040 1.405694 0.357557 O 1 DMSO -0.5085 **** 7 C4 > -1.352189>> -0.857006 0.225851 CT 1 DMSO -0.2897 **** 8 H41 > -2.275117 -0.356396>> -0.035149 H1 1 DMSO 0.1284 **** 9 H42 > -1.336143 -1.843599 -0.221415>> H1 1 DMSO 0.1284 **** 10 H43 > -1.276895 -0.923466 1.304085 H1 1 DMSO>> 0.1284 ****You could do > that using the 'set' command on the LEaP>> program:See>> > http://ambermd.org/doc6/html/AMBER-sh-5.9.html#sh-5.9.63See for>> > instance the LEaP script in R.E.DD.B.: http://q4md-forcefieldtool>> > s.org/REDDB/projects/W-46/script1.ff# tripos1.mol2set DMSO.1.C1 > type>> CTset DMSO.1.H11 type H1set DMSO.1.H12 type H1set DMSO.1.H13 > type>> H1# You might prefer to add your own FF atom types for S2 & > O3set>> DMSO.1.S2 type SXset D> MSO.1.O3 type OXset DMSO.1.C4 type CTset>> DMSO.1.H41 type H1set > DMSO.1.H42 type H1set DMSO.1.H43 type H1or I>> guess you can use > Antechamber to load the mol2 file generated by>> R.E.D. without atom > types and output another mol2 file with atom>> types...you could > also send us your R.E.D. job as well (replacing>> the .com gaussian > input by .com.txt to avoid problems with mail>> servers) so that we > run the Re-fit mode of R.E.D. Python to generate>> a mol3 file with > residue connection (if needed), atom types, charges>> corrected for > rounding error errors with frcmod files, we can add>> lone pairs and > extra-points, united carbons, etc...if you used>> R.E.D. Server just > request a private assistance from the web site &>> provide the PXXXX > R.E.D. Server job name.See http://q4md-forcefieldtoo>> > ls.org/REDS/faq.php#5 we can take data from there & regenerate > data>> for you; > see:http://q4md-forcefieldtools.org/REDS/faq.php#22regards,>> > Francois> I am trying to prepare the input files for ambe> r>> simulation on a > protein-ligand. The ligand is named G39 in the > pdb>> file. I used > R.E.D. server to generate the mol2 file>> > (Mol_m1-o1.mol2) and then > used  parmchk to produce the frcmod>> > file. Next I tried to use tleap, > and the leap.in file is:> > source>> leaprc.gaffsource leaprc.ff10loadamberparams frcmodMOL = > > loadmol2>> Mol_m1-o1.mol2comp = loadpdb complex.pdbbond comp.92.SG > >>> comp.417.SGbond comp.124.SG comp.129.SGbond comp.183.SG >>> > comp.230.SGbond comp.232.SG comp.237.SGbond comp.91.SG >>> > comp.417.SGbond comp.124.SG comp.129.SGbond comp.183.SG >>> > comp.230.SGbond comp.232.SG comp.237.SGbond comp.278.SG >>> > comp.291.SGbond comp.91.SG comp.417.SGbond comp.280.SG >>> > comp.289.SGbond comp.318.SG comp.336.SGbond comp.421.SG >>> > comp.447.SGsolvatebox comp TIP3PBOX 10.0addions comp Na+ 0saveoff > >>> comp>> 3cl0.offsaveamberparm comp 3cl0.prmtop 3cl0.inpcrdquit> >  > However,>> when I run tleap -s -f leap.in, I get the follow > output:> Loading>> parameters: ./frcmodReadi> ng force field modification type > file>> (frcmod)Reading > title:remark goes hereLoading Mol2 file: >>> ./Mol_m1-o1.mol2Reading > MOLECULE named G39Loading PDB file: >>> > ./3cl0_H274Y_N1_H_SG_noh.pdbUnknown residue: CA   number: 385   >>> > type: NonterminalUnknown residue: G39   number: 386   type: >>> > NonterminalCreated a new atom named: OXT within residue: .R<ILE >>> > 467>Creating new UNIT for residue: CA sequence: 468One sided >>> > connection. Residue:  missing connect0 atom.Created a new atom >>> > named: CA within residue: .R<CA 468>Creating new UNIT for residue: > >>> G39 sequence: 469Created a new atom named: C1 within residue: > .R<G39>> > 469>Created a new atom named: O1A within residue: > .R<G39>> 469>Created > a new atom named: O1B within residue: > .R<G39>> 469>Created a new atom > named: C2 within residue: .R<G39>> > 469>Created a new atom named: C3 > with>> in residue: .R<G39 > 469>Created a new atom named: C4 within >>> residue: .R<G39 > 469>Created a new atom named: C5 within residue: >>>> .R<G39 469>Created a new atom> named: N5 within residue: .R<G39>> > 469>Created a new atom named: C10 > within residue: .R<G39>> > 469>Created a new atom named: O10 within > residue: .R<G39>> > 469>Created a new atom named: C11 within residue: > .R<G39>> > 469>Created a new atom named: C6 within residue: .R<G39 >>> > 469>Created a new atom named: C7 within residue: .R<G39 > 469>Created>> > a new atom named: O7 within residue: .R<G39 > 469>Created a new atom>> > named: C8 within residue: .R<G39 > 469>Created a new atom named: C9>> > within residue: .R<G39 > 469>Created a new atom named: C81 within >>> residue: .R<G39 > 469>Created a new atom named: C82 within residue: >>> .R<G39 > 469>Created a new atom named: C91 within residue: .R<G39 >>> > 469>Created a new atom named: N4 within residue: .R<G39 469>  > total>> > atoms in file: 3161  Leap added 3138 missing atoms > according to >>> residue templates:       3>> 138 H / lone pairs  > The file contained 22 > atoms not in residue>> templatesbond: > Argument #1 is t> ype String must > be of type:>> [atom]usage:  bond <atom1> <atom2> > [order]bond: Argument > #1 is>> type String must be of type: > [atom]usage:  bond <atom1> > <atom2>>> [order]bond: Argument #1 is > type String must be of type: >>> [atom]usage:  bond <atom1> <atom2> > [order]bond: Argument #1 is type>> > String must be of type: > [atom]usage:  bond <atom1> <atom2> >>> [order]bond: Argument #1 is > type String must be of type: >>> [atom]usage:  bond <atom1> <atom2> > [order]bond: Argument #1 is type>> > String must be of type: > [atom]usage:  bond <atom1> <atom2> >>> [order]bond: Argument #1 is > type String must be of type: >>> [atom]usage:  bond <atom1> <atom2> > [order]bond: Argument #1 is type>> > String must be of type: > [atom]usage:  bond <atom1> <atom2> >>> [order]bond: Argument #2 is > type String must be of type: >>> [atom]usage:  bond <atom1> <atom2> > [order]bond: Argument #2 is type>> > String must be of type: > [atom]usage:  bo>> nd <atom1> <atom2> > [order] (using default > radius 1.500000 for>>> OXT) (using default > radius 1.500000 for CA) (using default > radius>> 1.500000 for > C1) (using default radius 1.500000 for > O1A) (using>> default radius > 1.500> 000 for O1B) (using default > radius 1.500000>> for C2) (using default > radius 1.500000 for > C3) (using default>> radius 1.500000 for > C4) (using default radius > 1.500000 for>> C5) (using default radius > 1.500000 for N5) (using > default radius>> 1.500000 for C10) (using > default radius 1.500000 > for O10) (using>> default radius 1.500000 for > C11) (using default > radius 1.500000>> for C6) (using default radius > 1.500000 for > C7) (using default>> radius 1.500000 for O7) (using > default radius > 1.500000 for>> C8) (using default radius 1.500000 for > C9) (using > default radius>> 1.500000 for C81) (using default radius > 1.500000 > for C82) (using>> default radius 1.500000 for C91) (using > default > radius 1.500000>> for N4)  Solute vdw bounding > box:              > 57.502 57.677>> 61.240  Total bou>> nding box for atom > centers:  7> 7.502 77.677 81.240  Solvent unit >>> box:                     > 18.774 18.774 18.774 (using default radius>> > 1.500000 for > OXT) (using default radius 1.500000 for CA) (using >>> default > radius 1.500000 for C1) (using default r> adius 1.500000 for>> > O1A) (using default radius 1.500000 for > O1B) (using default > radius>> 1.500000 for C2) (using default radius > 1.500000 for > C3) (using>> default radius 1.500000 for C4) (using > default radius > 1.500000 for>> C5) (using default radius 1.500000 for > N5) (using > default radius>> 1.500000 for C10) (using default radius > 1.500000 > for O10) (using>> default radius 1.500000 for C11) (using > default > radius 1.500000>> for C6) (using default radius 1.500000 for > > C7) (using default>> radius 1.500000 for O7) (using default radius > > 1.500000 for>> C8) (using default radius 1.500000 for C9) (using > > default radius>> 1.500000 for C81) (using default radius 1.500000 > for > C82) (using>> default radius 1.500000 for C91) (using default > radius > 1.50>> 0> 000 for N4)  Total vdw box size:                   80.756 > 81.019>> > 84.432 angstroms.  Volume: 552415.997 A^3   Mass > 274487.606 >>> > amu,  Density > 0.825 g/cc      (type - hence mass - of one or > more>> > atoms could not be found)  Added 12722 residues.3 Na+ > ions>> required > to neutraliz> e.Using default radius  1.50 for > ion>> Na+Adding 3 counter ions to > "comp" using 1A gridUsed > default>> radius  1.50 for 22 atomsGrid > extends from solute vdw + > 1.50  to >> 7.50Resolution:      1.00 > Angstrom.grid build: 1 > secSolvent>> present: replacing closest with > ion         when > steric overlaps>> occurCalculating grid > chargescharges: 9 > sec(Replacing solvent>> molecule)Placed Na+ in comp > at (-22.85, > 22.75, 4.56).(No solvent>> overlap)Placed Na+ in comp at > (19.11, > -6.61, -17.97).(Replacing>> solvent molecule)Placed Na+ in > comp at > (5.85, 31.42, 8.49).Done>> adding ions.Building > topology.Building > atom parameters.Checking>> Unit.FATAL:  Atom .R<ILE > 467>.A<OXT 20> > does not have a> >> type.FATAL:  Atom .R<CA 46>> 8>.A<CA 1> > does not have a > type.FATAL:  Atom .R<G39 469>.A<C1 1>>> does not have > a > type.FATAL:  Atom .R<G39 469>.A<O1A 2> does not>> have a > > type.FATAL:  Atom .R<G39 469>.A<O1B 3> does not have a>> > type.FATAL:  > Atom .R<G39 469>.A<C2 4> does not have a > type.FATAL: >> Atom .R<G39 > 469>.A<C3 5> does not have a type.FA> > TAL:  Atom>> .R<G39 469>.A<C4 6> does not have a type.FATAL:  Atom > > .R<G39>> 469>.A<C5 7> does not have a type.FATAL:  Atom .R<G39 > > 469>.A<N5 8>>> does not have a type.FATAL:  Atom .R<G39 469>.A<C10 > 9> > does not>> have a type.FATAL:  Atom .R<G39 469>.A<O10 10> does > not > have a>> type.FATAL:  Atom .R<G39 469>.A<C11 11> does not have > a >>> type.FATAL:  Atom .R<G39 469>.A<C6 12> does not have a > type.FATAL: >> > Atom .R<G39 469>.A<C7 13> does not have a > type.FATAL:  Atom .R<G39>> > 469>.A<O7 14> does not have a > type.FATAL:  Atom .R<G39 469>.A<C8>> 15> > does not have a > type.FATAL:  Atom .R<G39 469>.A<C9 16> does>> not have > a typ> e.FATAL:  Atom .R<G39 469>.A<C81 17> does not have a>> > type.>> > FATAL:  Atom .R<G39 469>.A<C82 18> does not have a type.FATAL:  >>> > Atom .R<G39 469>.A<C91 19> does not have a type.FATAL:  Atom > .R<G39>> > 469>.A<N4 20> does not have a type.Failed to generate >>> > parametersParameter file was not saved.        Quit> The ligand,>> > G39, is numbered 800 in the original pdb file, but leap > seemed > to>> renumber it as 469. Except the difference in G39 > numbering, > I>> cannot find any other thing that cause the errors, > Could you > help>> me figure it out? Thanks in>> > advance._______________________________________________AMBER > mailing>> > listAMBER@ambermd.orghttp://lists.ambermd.org/mailman/listinfo/amber_______________________________________________AMBER mailing > listAMBER@ambermd.orghttp://lists.ambermd.org/mailman/listinfo/amber> _______________________________________________> AMBER mailing list> AMBER@ambermd.org> http://lists.ambermd.org/mailman/listinfo/amber>F.-Y. Dupradeau---http://q4md-forcefieldtools.org/FyD/_______________________________________________AMBER mailing listAMBER@ambermd.orghttp://lists.ambermd.org/mailman/listinfo/amber
_______________________________________________
AMBER mailing list
AMBER.ambermd.org
http://lists.ambermd.org/mailman/listinfo/amber
Received on Tue Jul 02 2013 - 18:30:02 PDT
Custom Search