I guess you want the output for force constant 0.5. Here they are.
NSTEP = 1 TIME(PS) = 10.001 TEMP(K) = 299.62 PRESS = 0.0
Etot = 19509.8677 EKtot = 4256.5489 EPtot = 15253.3188
BOND = 1485.1811 ANGLE = 2344.0215 DIHED = 2626.9553
1-4 NB = 1229.1304 1-4 EEL = 826.5103 VDWAALS = -2170.8074
EELEC = -1453.0778 EHBOND = 0.0000 RESTRAINT = 10365.4054
EAMBER (non-restraint) = 4887.9134
------------------------------------------------------------------------------
NSTEP = 2 TIME(PS) = 10.002 TEMP(K) = 300.97 PRESS = 0.0
Etot = 19512.1920 EKtot = 4275.6783 EPtot = 15236.5136
BOND = 1480.1913 ANGLE = 2333.3413 DIHED = 2623.9937
1-4 NB = 1227.3937 1-4 EEL = 826.9741 VDWAALS = -2170.9020
EELEC = -1450.8055 EHBOND = 0.0000 RESTRAINT = 10366.3270
EAMBER (non-restraint) = 4870.1866
------------------------------------------------------------------------------
NSTEP = 3 TIME(PS) = 10.003 TEMP(K) = 300.88 PRESS = 0.0
Etot = 19509.7266 EKtot = 4274.3763 EPtot = 15235.3503
BOND = 1490.2147 ANGLE = 2327.4749 DIHED = 2621.9514
1-4 NB = 1225.9541 1-4 EEL = 827.4478 VDWAALS = -2169.1865
EELEC = -1454.9689 EHBOND = 0.0000 RESTRAINT = 10366.4630
EAMBER (non-restraint) = 4868.8873
------------------------------------------------------------------------------
NSTEP = 4 TIME(PS) = 10.004 TEMP(K) = 300.19 PRESS = 0.0
Etot = 19513.8948 EKtot = 4264.6915 EPtot = 15249.2034
BOND = 1501.0549 ANGLE = 2328.1776 DIHED = 2621.0000
1-4 NB = 1224.9311 1-4 EEL = 827.9668 VDWAALS = -2166.8872
EELEC = -1452.8313 EHBOND = 0.0000 RESTRAINT = 10365.7914
EAMBER (non-restraint) = 4883.4120
------------------------------------------------------------------------------
NSTEP = 5 TIME(PS) = 10.005 TEMP(K) = 300.05 PRESS = 0.0
Etot = 19509.0390 EKtot = 4262.6168 EPtot = 15246.4223
BOND = 1495.8537 ANGLE = 2335.7618 DIHED = 2621.1293
1-4 NB = 1224.3465 1-4 EEL = 828.5270 VDWAALS = -2165.0672
EELEC = -1458.4626 EHBOND = 0.0000 RESTRAINT = 10364.3339
EAMBER (non-restraint) = 4882.0884
------------------------------------------------------------------------------
..
..
..
..
..
NSTEP = 32 TIME(PS) = 10.032 TEMP(K) = 315.90 PRESS = 0.0
Etot = 19498.8441 EKtot = 4487.8493 EPtot = 15010.9948
BOND = 1452.3568 ANGLE = 2381.3638 DIHED = 2622.1332
1-4 NB = 1250.9774 1-4 EEL = 828.9638 VDWAALS = -2176.2030
EELEC = -1469.4974 EHBOND = 0.0000 RESTRAINT = 10120.9001
EAMBER (non-restraint) = 4890.0947
------------------------------------------------------------------------------
NSTEP = 33 TIME(PS) = 10.033 TEMP(K) = 318.23 PRESS = 0.0
Etot = 19495.8606 EKtot = 4520.8692 EPtot = 14974.9914
BOND = 1441.3492 ANGLE = 2377.9541 DIHED = 2620.1685
1-4 NB = 1250.9751 1-4 EEL = 828.7977 VDWAALS = -2177.7700
EELEC = -1471.3100 EHBOND = 0.0000 RESTRAINT = 10104.8268
EAMBER (non-restraint) = 4870.1647
------------------------------------------------------------------------------
NSTEP = 34 TIME(PS) = 10.034 TEMP(K) = 319.80 PRESS = 0.0
Etot = 19499.4071 EKtot = 4543.2099 EPtot = 14956.1972
BOND = 1442.9031 ANGLE = 2371.8018 DIHED = 2619.4572
1-4 NB = 1251.0418 1-4 EEL = 828.6447 VDWAALS = -2178.2709
EELEC = -1467.6949 EHBOND = 0.0000 RESTRAINT = 10088.3147
EAMBER (non-restraint) = 4867.8826
------------------------------------------------------------------------------
NSTEP = 35 TIME(PS) = 10.035 TEMP(K) = 320.93 PRESS = 0.0
Etot = 19500.3084 EKtot = 4559.2268 EPtot = 14941.0816
BOND = 1450.2755 ANGLE = 2364.2386 DIHED = 2620.1680
1-4 NB = 1251.2244 1-4 EEL = 828.5121 VDWAALS = -2177.3447
EELEC = -1467.3313 EHBOND = 0.0000 RESTRAINT = 10071.3392
EAMBER (non-restraint) = 4869.7424
------------------------------------------------------------------------------
Carlos Simmerling wrote:
> send the first few steps of output again.
> ----- Original Message -----
> From: "Youyi Peng" <pengyo.UMDNJ.EDU>
> To: "Carlos Simmerling" <carlos.simmerling.stonybrook.edu>;
> <amber.heimdal.compchem.ucsf.edu>
> Sent: Friday, April 18, 2003 2:33 PM
> Subject: Re: MD went crazy
>
> > Drs. Simmerling and Crowley:
> > Thank you for your advice.
> > I tried the MD without restraints and with different force constant. It
> looks
> > that distance restraint is fine but backbone restaint causes the problem.
> Even
> > with the force constant 0.5 kcal/mol-A^2, the temp. will increse to 340K
> from
> > 300K. So if I want to fix the backbone during MD, what can I do?
> > Thanks a lot!
> >
> > Carlos Simmerling wrote:
> >
> > > if the step 1 restraint energies are this high,
> > > then the initial coordinates do not satify the restraints.
> > > check them to see what is wrong.
> > > carlos
> > >
> > > ----- Original Message -----
> > > From: "Youyi Peng" <pengyo.UMDNJ.EDU>
> > > To: "Carlos Simmerling" <carlos.simmerling.stonybrook.edu>;
> > > <amber.heimdal.compchem.ucsf.edu>
> > > Sent: Friday, April 18, 2003 1:36 PM
> > > Subject: Re: MD went crazy
> > >
> > > > This is the summary for step 1. TEMP is extremely high: 6238.65K. This
> MD
> > > run
> > > > followed the previous run without restraints (the last step is shown
> > > below).
> > > >
> > > > STEP1 for this run:
> > > > Local SIZE OF NONBOND LIST = 795677
> > > > | TOTAL SIZE OF NONBOND LIST = 795677
> > > > vlimit exceeded for step 0; vmax = 24.0628678
> > > >
> > > > NSTEP = 1 TIME(PS) = 10.001 TEMP(K) = 6238.65 PRESS =
> 0.0
> > > > Etot = ************ EKtot = 88628.9015 EPtot =
> ************
> > > > BOND = 1485.1811 ANGLE = 2344.0215 DIHED =
> 2626.9553
> > > > 1-4 NB = 1229.1304 1-4 EEL = 826.5103 VDWAALS
> = -2170.8074
> > > > EELEC = -1453.0778 EHBOND = 0.0000 RESTRAINT =
> ************
> > > > EAMBER (non-restraint) = 4887.9134
> > >
> -------------------------------------------------------------------------
> > > -----
> > > >
> > > >
> > >
> ============================================================================
> > > ===
> > > >
> > > > NMR restraints for step 1
> > > > Energy (this step): Bond = 25.128 Angle = 0.000 Torsion =
> > > 0.000
> > > > Energy (tot. run) : Bond = 25.128 Angle = 0.000 Torsion =
> > > 0.000
> > > >
> > > > DEVIATIONS: Target=(r2+r3)/2 Target = closer of
> r2/r3
> > > > This step Entire run This step
> Entire
> > > run
> > > > ave. rms ave. rms ave. rms ave.
> > > rms
> > > > Bond 1.956 1.956 1.956 1.956 1.506 1.506 1.506
> > > 1.506
> > > > Angle 0.000 0.000 0.000 0.000 0.000 0.000 0.000
> > > 0.000
> > > > Torsion 0.000 0.000 0.000 0.000 0.000 0.000 0.000
> > > 0.000
> > > >
> > >
> ============================================================================
> > > ===
> > > >
> > > > The last step for previous run:
> > > >
> > > > NSTEP = 10000 TIME(PS) = 10.000 TEMP(K) = 297.41 PRESS =
> 0.0
> > > > Etot = 9143.5794 EKtot = 4225.1734 EPtot =
> 4918.4060
> > > > BOND = 1497.6732 ANGLE = 2357.3947 DIHED =
> 2630.4760
> > > > 1-4 NB = 1230.9899 1-4 EEL = 825.9995 VDWAALS
> = -2168.5049
> > > > EELEC = -1455.6224 EHBOND = 0.0000 RESTRAINT =
> 0.0000
> > >
> -------------------------------------------------------------------------
> > > -----
> > > >
> > > >
> > > >
> > > > Carlos Simmerling wrote:
> > > >
> > > > > this still says NTEP=100. that is NOT step 1.
> > > > > please send output for step 1. if you don't have it,
> > > > > rerun for 100 steps with ntpr=1.
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Youyi Peng" <pengyo.UMDNJ.EDU>
> > > > > To: "Carlos Simmerling" <carlos.simmerling.stonybrook.edu>;
> > > > > <amber.heimdal.compchem.ucsf.edu>
> > > > > Sent: Friday, April 18, 2003 12:17 PM
> > > > > Subject: Re: MD went crazy
> > > > >
> > > > > > At step one, the energy is already high. Below are energy
> summaries
> > > for
> > > > > step
> > > > > > 1 and step 2.
> > > > > >
> > > > > > NSTEP = 100 TIME(PS) = 10.100 TEMP(K) =********* PRESS =
> > > 0.0
> > > > > > Etot = ************ EKtot = ************ EPtot =
> > > 2030503.4104
> > > > > > BOND = 680589.0727 ANGLE = 195442.5670 DIHED =
> > > 15070.5764
> > > > > > 1-4 NB = 147731.1861 1-4 EEL = 515.4914 VDWAALS =
> > > 119163.7687
> > > > > > EELEC = -1082.3027 EHBOND = 0.0000 RESTRAINT =
> > > 873073.0509
> > > > > > EAMBER (non-restraint) = 1157430.3595
> > > > >
> >
> -------------------------------------------------------------------------
> > > > > -----
> > > > > >
> > > > > >
> > > > >
> > >
> ============================================================================
> > > > > ===
> > > > > >
> > > > > > NMR restraints for step 100
> > > > > > Energy (this step): Bond = 68.602 Angle = 0.000 Torsion
> =
> > > > > > 0.000
> > > > > > Energy (tot. run) : Bond = 29.972 Angle = 0.000 Torsion
> =
> > > > > > 0.000
> > > > > >
> > > > > > DEVIATIONS: Target=(r2+r3)/2 Target = closer
> of
> > > r2/r3
> > > > > > This step Entire run This step
> > > Entire
> > > > > run
> > > > > > ave. rms ave. rms ave. rms
> ave.
> > > > > rms
> > > > > > Bond 4.130 4.130 2.103 2.103 3.680 3.680
> 1.699
> > > > > > 1.699
> > > > > > Angle 0.000 0.000 0.000 0.000 0.000 0.000
> 0.000
> > > > > > 0.000
> > > > > > Torsion 0.000 0.000 0.000 0.000 0.000 0.000
> 0.000
> > > > > > 0.000
> > > > > >
> > > > > > NSTEP = 200 TIME(PS) = 10.200 TEMP(K) =********* PRESS =
> > > 0.0
> > > > > > Etot = ************ EKtot = ************ EPtot =
> > > 2515784.3097
> > > > > > BOND = 785400.7401 ANGLE = 208233.2922 DIHED =
> > > 15222.1171
> > > > > > 1-4 NB = 447817.5405 1-4 EEL = 578.4161 VDWAALS =
> > > 113434.8320
> > > > > > EELEC = -1240.8367 EHBOND = 0.0000 RESTRAINT =
> > > 946338.2084
> > > > > > EAMBER (non-restraint) = 1569446.1013
> > > > >
> >
> -------------------------------------------------------------------------
> > > > > -----
> > > > > >
> > > > > >
> > > > >
> > >
> ============================================================================
> > > > > ===
> > > > > >
> > > > > > NMR restraints for step 200
> > > > > > Energy (this step): Bond = 11.717 Angle = 0.000 Torsion
> =
> > > > > > 0.000
> > > > > > Energy (tot. run) : Bond = 28.517 Angle = 0.000 Torsion
> =
> > > > > > 0.000
> > > > > >
> > > > > > DEVIATIONS: Target=(r2+r3)/2 Target = closer
> of
> > > r2/r3
> > > > > > This step Entire run This step
> > > Entire
> > > > > run
> > > > > > ave. rms ave. rms ave. rms
> ave.
> > > > > rms
> > > > > > Bond 1.286 1.286 2.078 2.078 0.836 0.836
> 1.651
> > > > > > 1.651
> > > > > > Angle 0.000 0.000 0.000 0.000 0.000 0.000
> 0.000
> > > > > > 0.000
> > > > > > Torsion 0.000 0.000 0.000 0.000 0.000 0.000
> 0.000
> > > > > > 0.000
> > > > > >
> > > > > > Carlos Simmerling wrote:
> > > > > >
> > > > > > > please provide output that lists the energies
> > > > > > > at the first step- by the time we see what is going
> > > > > > > on, it already has the vlimit warnings. it is important
> > > > > > > to see the first step restraint energies, and how quickly
> > > > > > > the energies rise, etc.
> > > > > > >
> ===================================================================
> > > > > > > Carlos L. Simmerling, Ph.D.
> > > > > > > Assistant Professor Phone: (631) 632-1336
> > > > > > > Center for Structural Biology Fax: (631) 632-1555
> > > > > > > Stony Brook University Web:
> > > http://comp.chem.sunysb.edu/carlos
> > > > > > > Stony Brook, NY 11794-5115 E-mail:
> > > carlos.simmerling.stonybrook.edu
> > > > > > >
> ===================================================================
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > From: "Youyi Peng" <pengyo.UMDNJ.EDU>
> > > > > > > To: <amber.heimdal.compchem.ucsf.edu>
> > > > > > > Sent: Friday, April 18, 2003 11:20 AM
> > > > > > > Subject: MD went crazy
> > > > > > >
> > > > > > > > Hi,
> > > > > > > > I initiated MD by heating the ligand-protein complex with no
> > > > > > > > constraints on the atoms from 0 to 300K in 10 ps.Then 100ps
> > > > > eqilibration
> > > > > > > > at the constant temp. 300K was performed on restrained
> backbone
> > > and
> > > > > > > > distance. I got crazy MD output. THe energy and temp. went to
> very
> > > > > high
> > > > > > > > and a lot of vlimit warnings. Below is the input file and part
> of
> > > the
> > > > > > > > output file. Please take a look for me.
> > > > > > > > Thank you very much and happy good Friday!
> > > > > > > >
> > > > > > > > MDIN:
> > > > > > > > dynamics w/o belly on protein, 9.0 cut, with constraints of
> > > backbone
> > > > > and
> > > > > > > > distance
> > > > > > > > &cntrl
> > > > > > > > nmropt = 1,
> > > > > > > > ntx = 5, irest = 1, ntrx = 1, ntxo
> = 1,
> > > > > > > > ntpr = 100, ntwx = 1000, ntwv = 0, ntwe
> =
> > > 0,
> > > > > > > >
> > > > > > > > ntf = 1, ntb = 0,
> > > > > > > > cut = 9.0, nsnb = 10, dielc=4.0
> > > > > > > >
> > > > > > > > ibelly = 0, ntr = 1,
> > > > > > > >
> > > > > > > > imin = 0,
> > > > > > > > nstlim = 100000,
> > > > > > > > nscm = 0, dt = 0.001,
> > > > > > > >
> > > > > > > > temp0 = 300.0, tempi = 300.0,
> > > > > > > > heat = 0.0,
> > > > > > > > ntt = 1,
> > > > > > > > tautp = 2.0,
> > > > > > > > vlimit = 20.0,
> > > > > > > >
> > > > > > > >
> > > > > > > > ntc = 1, tol = 0.00001,
> > > > > > > > &end
> > > > > > > >
> > > > > > > > &ewald
> > > > > > > > eedmeth=5,
> > > > > > > > &end
> > > > > > > >
> > > > > > > > &wt
> > > > > > > > type='END' ,
> > > > > > > > &end
> > > > > > > >
> > > > > > > > LISTOUT=POUT
> > > > > > > > DISANG=RST.dist
> > > > > > > >
> > > > > > > > Hold the backbone restrainted
> > > > > > > > 500.0
> > > > > > > > FIND
> > > > > > > > * CT * *
> > > > > > > > * N * *
> > > > > > > > * C * *
> > > > > > > > * O * *
> > > > > > > > SEARCH
> > > > > > > > RES 1 293
> > > > > > > > END
> > > > > > > > END
> > > > > > > >
> > > > > > > > OUTPUT
> > > > > > > > vlimit exceeded for step 992; vmax = 1297679.08
> > > > > > > > vlimit exceeded for step 993; vmax = 200557512.
> > > > > > > > vlimit exceeded for step 994; vmax = 86296.6221
> > > > > > > > vlimit exceeded for step 995; vmax = 530655.444
> > > > > > > > vlimit exceeded for step 996; vmax = 719129.926
> > > > > > > > vlimit exceeded for step 997; vmax = 2.54845046E+09
> > > > > > > > vlimit exceeded for step 998; vmax = 97404.1622
> > > > > > > > vlimit exceeded for step 999; vmax = 330667.274
> > > > > > > >
> > > > > > > > NSTEP = 1000 TIME(PS) = 11.000 TEMP(K) =********* PRESS
> =
> > > > > 0.0
> > > > > > > >
> > > > > > > > Etot = ************ EKtot = ************ EPtot =
> > > > > > > > 3906732.9101
> > > > > > > > BOND = 865895.1848 ANGLE = 223527.1116 DIHED =
> > > > > > > > 15612.3010
> > > > > > > > 1-4 NB = 1509819.0853 1-4 EEL = 546.5250 VDWAALS =
> > > > > > > > 163607.4823
> > > > > > > > EELEC = -1106.9859 EHBOND = 0.0000 RESTRAINT =
> > > > > > > > 1128832.2060
> > > > > > > > EAMBER (non-restraint) = 2777900.7040
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > >
> > > > > >
> > > >
> > > >
> >
> >
Received on Fri Apr 18 2003 - 19:53:00 PDT